Siemens SITRANS PCS 7 Function Manual page 223

Parameter
NoFbkAuxVOpen
NoFbkClose
NoFbkOpen
Occupied
OosLi
OosOp*
OpenAut*
OpenForce
OpenMan*
OpSt_In
OS_Perm
OS1Perm
Perm_En
Permit
PosDeadBand
PosDiClose
PosDiOpen
Prot_En
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
Description
1 = No "open" feedback for auxil‐
iary valve present
1 = No feedback present for "con‐
trol valve closed"
1 = No feedback present for "con‐
trol valve open"
1 = In use by a batch
1 = "Out of service", via intercon‐
nection or SFC
1 = "Out of service", via OS oper‐
ator
1 = Select Open valve in "auto‐
matic mode"
1 = Forced open of control valve
1 = Select Open valve in "manual
mode"
Input parameter for local operator
authorization, to be interconnec‐
ted with the Out output parameter
of the upstream OpStations block
I/O for operating permissions
I/O for operating permissions
1 = Activation enable (enable,
Permit parameter) is active
1 = Enable for opening / closing
from neutral position
0 = No activation enable for the
valve
Dead band for forming manipu‐
lated variable difference
Limit for control valve position
"closed"
Limit for control valve position
"open"
1 = Protective interlock (protec‐
tion, Protect parameter) is active
SIPART PS2 HART
Type Default
BOOL 1
BOOL 0
BOOL 0
BOOL 0
STRUCT -
Value: BOOL 0
ST: BYTE 16#80
BOOL 0
STRUCT -
Value: BOOL 0
ST: BYTE 16#80
STRUCT -
Value: BOOL 0
ST: BYTE 16#80
BOOL 0
DWORD 16#00000000
STRUCT -
Bit 0: BOOL 1
Bit 12: BOOL 1
Bit 31: BOOL 1
STRUCT -
Bit 0: BOOL 1
... 1
Bit 31: BOOL 1
BOOL 1
STRUCT -
Value: BOOL 1
ST: BYTE 16#FF
REAL 0.1
REAL 5.0
REAL 95.0
BOOL 1
7.1 SipPS2HA
223