Siemens SITRANS PCS 7 Function Manual page 606

SITRANS FC430 PA
13.1 SiFC43PA
The following operating modes can be shown here:
● On (see the APL online help)
● Out of service (see APL Online Help)
With totalizer:
The block can be operated using the following modes:
● Local mode
● Automatic mode
● Manual mode
● Out of service
(7) Display and change the totalizer command PV4: Hold and Totalize
This area shows you the current operating state for the totalizer PV4. The following states can
be shown and executed here:
● "Hold"
● "Totalize"
If a totalizer is not configured, the area is switched to invisible.
(8) Reset totalizer PV4
Reset the totalizer value to zero here.
(9) Display of process value (PV4) including signal status
This area indicates the current process value (PV4) with the associated signal status. The name
of the configured measured value is displayed depending on the PV_Meas4 variable, in this
case Totalizer3 : Corrected Volume Flow.
(10) Change to third standard view
The third part of the two-part standard view of the faceplate can be selected here.
606
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11