Standard View Of Lut400 - Siemens SITRANS PCS 7 Function Manual

6.1.9.2

Standard view of Lut400

Depending on the configuration of the 4 to 20 mA signal and the up to four HART variables in
the standard view, the current process values for the fill level, space, distance, volume, flow,
and/or head are displayed. If a measured value is not assigned to a variable, the field is hidden.
(1) Display and switch the operating mode
This area provides information on the currently valid operating mode. The following operating
modes can be shown here:
● On (see the APL online help)
● Out of service (see APL Online Help)
For more information on changing the operating mode, refer to the "Switching operating states
and operating modes" section in the APL Online Help.
(2) High and low scale range for the process value (4 to 20 mA signal)
These values provide information on the display range for the bar graph of the process value
(4 to 20 mA signal). The scale range is set in the engineering system with the PV_OpScale
parameter (see Display and operating range for process values and limits).
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
SITRANS LUT400
6.1 Lut400
175