Siemens SITRANS PCS 7 Function Manual page 512

SITRANS FC430
12.1 SitrFC43
(7) Display and switchover of operating mode SV
This area provides information on the currently valid operating mode. The operating mode
switchover depends on whether or not a totalizer or dosing is configured.
The following operating modes can be shown here:
Without totalizer/dosing:
The following operating modes can be shown here:
● On (see the APL online help)
● Out of service (see APL Online Help)
With totalizer or dosing:
The block can be operated using the following modes:
● Local mode
● Automatic mode
● Manual mode
● Out of service
For more information on changing the operating mode, refer to the "Switching operating states
and operating modes" section in the APL Online Help.
(8) Display and change the setpoint if dosing is configured
The following states can be shown and changed here:
● "Internal"
● "External"
For more information, refer to the "Manual and automatic mode for motors, valves and dosing
units" section in the APL Online Help.
(9) Display and change the dosing unit: Start, resume, pause and stop
This area shows you the default operating state for the dosing unit. The following states can be
shown and changed here:
● "Start"
● "Continue"
● "Pause"
● "Stop"
(10) Display of the dosed quantity
This area provides information on the currently dosed quantity.
512
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11