LOST TIME ENTRIES
IMPACT ENTRIES
The lost time
is
the length of time during which the system
or part of the system was down or degraded. The request
for lost time appears for unscheduled events only. Figure
2-33 illustrates a sample display showing the request for
lost time.
The final entry you make identifies the impact of the
event; that is, was the system degraded or down. Degraded
implies that the system resources were reduced, and down
means that they were unavailable. Figure 2-34 illustrates a
sample display showing the request for impact.
This
request is made for unscheduled events only.
Enter the lost time in hours and minutes in the format
shown. The same restrictions in format apply as in the
elapsed time entry.
Enter the code for the impact.
The item you select
appears on the line labeled IMPACT.
2-32
CYBERLOG
EVENT TYPE:
UNSCHEDULED
REASON:
HARDWARE
COMPONENT:
DISK SUBSYSTEM
ELAPSED TIME:
03.15
ENTER THE TIME LOST IN THE FORMAT:
HH.MM
Figure 2-33. CYBERLOG Display Request for Lost Time
CYBERLOG
EVENT TYPE:
UNSCHEDULED
REASON:
HARDWARE
COMPONENT:
DISK SUBSYSTEM
ELAPSED TIME:
03.15
LOST TIME:
03.15
ENTER THE CODE FOR THE" IMPACT OF THE EVENT
CODE
o
1
DESCRIPTION
DEGRADED
DOWN
Figure 2-34. CYBERLOG Display Request for Impact
60435600
J
Need help?
Do you have a question about the CYBER 170 Series and is the answer not in the manual?