Control Data Corporation CYBER 170 Series Operator's Manual page 189

~
en
o
.;.
~
c:n
c:J)
o
o
~
tp
....
c:n
-
~-~j
~~
MESSAGE
CRxx,BINARY CARD ERROR.
CRxx, CRec FCN ff REJECT.
CRxx,CRcc,XMSN PARITY ERROR.
CRxx, COMPARE ERROR.
CRxx, COMPARE ERROR.
CRxx. RE-RD
1
CD. COMPARE ERROR.
CRxx, RE-READ n CARD(S).
CRM( ••• parameter-list ••• )
CS=ssss.
CS CODE LEV=yyy, LCF CODE LEV=xxx
\.J
~/
SIGNIFICANCE
Binary checksum error on card.
Function reject error was detected on a
405 card reader.
xx
EST ordinal of device
cc Channel number
ff Function code
A transmission parity error was detected.
xx EST ordinal of device
cc Channel number
Compare error was detected on card.
xx EST ordinal of 405 card reader
Compare error was detected on card reader
with EST ordinal xx.
Card compare error was detected on card
reader with EST ordinal xx.
Error in cards read from card reader.
xx EST ordinal of 405 card reader
n Number of cards to be reread
This is a copy of a CRM statement that is in
error. A subsequent message follows.
A coupler status error has occurred.
ssss Status (four octal digits)
Informative message indicating that the
code level xxx at which the LCF was created
is not the same as the present code level
yyy of CS.
ACTION
Reread two cards.
Inform customer
engineer.
Inform customer
engineer.
Reread one card.
Reread deck.
1.
Remove first card in
input hopper from
feed station.
2.
Place last card from
output hopper in
front of cards in
input hopper
(including card just
removed from feed
station).
3. Release cards in
input hopper and press
READY swl tch.
Reread last n cards in
the output stacker. If
error still occurs, mark
the card as mispunched
and end job.
Inform site analyst.
Redeadstart. If
message persists,
inform site analyst.
Rerun NDLP to create
new LCF.
~.,: ~)
ROUTINE
2RC
2RC
2RC
2RC
lCD
lCD
2RC
TAF
CDX
CS