Control Data Corporation CYBER 170 Series Operator's Manual page 238

-
%
001:>0
C)
o
001:>0
t.:I
til
c:J)
o
o
~
MESSAGE
NAM NOT AVAILABLE.
NAM PHYSICAL ERROR EC=ec.
NAM REJECT.
NAM VERSION 1.1 LEVEL nnnn.
NC IS NOT A POWER OF
2.
NCF ASSIGNED,PFN=filenam,UN=usernam
NCF ERROR - ec
NCF NOT AVAILABLE(,PFN=filenam,UN=usernam)
SIGNIFICANCE
Informative message indicating that TAF is
currently at a control point but NAM is not.
Transactions can be initiated from batch
only.
NAM has detected a physical error indicated
by error code ec.
During login processing, NAM rejected the
terminal.
Informative message indicating that NIP has
initialized successfully and is ready to
process applications (including the
supervisors).
nnnn Current integration or PSR level
The number of catalog tracks specified must
be a power of two.
Informative message indicating that the NCF
has been attached successfully. This
message is followed by the date and time
from the NCF verification record.
filenam Name of NCF
usernam User name under which the NCF is
_ stored
An
error has been detected during
processing 6f the NCF.
ec Error code
1 No verification record is present
2
The NPU record which was expected
is missing
3 The host record which was
expected is missing
4
The network record which was
expected is missing
5 No NCF is present with which to
build tab les
The NCF to be used by NS could not be
attached. If PFN and UN are not shown, a
default NCF was not specified by the
installation.
filenam Name of NCF
usernam User name under which NCF is
stored
ACTION
Bring NAM to a control
point, if desired.
Refer to the NAM Refer-
ence Manual for the
meaning of this error
code.
Infonn site analyst.
None.
Correct and enter GO.
None.
Assign another NCF file.
Assign another NCF file.
ROUTINE
TAF
TAF
TAF
NIP
MSI
NS
NS
NS