Control Data Corporation CYBER 170 Series Operator's Manual page 199

~--
C»
o
tI:oo
~
<:11
C»
o
o
t"'
\l:1
I
t-.?
<:11
-
~-~ ~
. .
~
MESSAGE
DUMP OF node/dmp COMPLETE
DUMP OR DROP.
DUMPS LOST
DUPLICATE BITS IN MASK.
DUPLICATE DN.
DUPLICATE NS NETON
DUPL ICATE PN.
DURATION TIME TERMINATE.
ECeeee,ann,s,addr,Ccccccc,Wwwwwww.
ECeeee,ann,s,Bbbb ••• b.
ECeeee,ann,s,Gggg ••• g.
~/
",--j
SIGNIFICANCE
Informative message indicating that the dump
of the specified node is complete.
node Name of NPU/node id of NPU
dmp Name of the dump
Operator message indicating that export has
detected, an abnormal condition which will
not allow continued operation.
K-display message indicating that requests
to dump the field length of the transaction
facility have been ignored because the
global task dump limit (GTDL) is not
greater than zero.
Device mask for the family has duplicate
bits set. This destroys the integrity of
the permanent file system by creating an
ambiguous mapping of user indexes.
Device number specified is the same as that
specified for another device in the family.
A second copy of the Network Supervisor (NS)
attempted to perform a NETON action.
Another pack in the system has the same
name.
Time-sharing subsystem has aborted in less
than
60
seconds after initialization or last
recovery.
An error has been detected on ECS. The
nature of the error is determined by examin-
ing each parameter in the message.
eeee Error incident n~mber
a Type of operation (one of the
ACTION
None.
Inform site analyst;
recommended action is to
dump Export field
length (via DMP control
statement entered under
DIS control) and then
drop E,XPORTL (via DSD
command n.STOP.).
Refer to the TAF
K.DUMPLIM command; this
command should be used
only under the direction
of the central site TAF
systems analyst.
Correct and enter GO, or
enter GO to override.
This is the only input
accepted at this time.
Correct and en'ter GO, or
enter GO to override.
This is the only input
accepted at this time.
Drop the duplicate NS
job (refer to n.KILL
command in section 3).
If NS aborts, it
automatically attempts
to restart.
Change the pack name or
remove the other device
from the system.
Inform site analyst.
Inform site analyst.
\
\.
ROUTINE
NS
lLS
TAF
MSI
MSI
NS
MSI
IAFEX,
TELEX
lMC