Control Data Corporation CYBER 170 Series Operator's Manual page 202

-
~
00
CJ)
Q
"' "
W
CJ1
CJ)
Q
Q
t"'
MESSAGE
EQxx,CHcc Adddd INCOMPLETE TRANSFER.
EQxx,CHcc CONTROLLER HUNG BUSY.
EQxx,CHcc, CONTROLLER RESERVED.
EQxx,CHcc Emmmm PFC ERROR.
EQxx,CHcc Fffff FUNCTION TIMEOUT.
SIGNIFICANCE
An
incomplete data transfer was detected
by a local batch equipment driver.
EQ One of the following equipment types.
xx
CP 415 card punch .
CR 405 card reader
LP Any line printer
LR 580-12 line printer
LS 580-16 line printer
LT . 580-20 line printer
EST ordinal of local batch
cc Channel number
equipment
dddd Octal byte count not transferred
The specified local batch controller did
not drop BUSY status.
EQ One of the following equipment types.
CP 415 card punch
CR 405 card reader
LP Any line printer
LR 580-12 line printer
LS 580-16 line printer
LT 580-20 line printer
xx EST ordinal of local batch equipment
cc Channel number
K-display message indicating that
equipment xx could not be accessed
because controller was reserved.
xx EST ordinal of device
cc Channel number
Detected PFC error on the specified local
batch equipment.
EQ One of the following equipment
types.
LR 580-12 line printer
LS 580~16 line printer
LT 580-20 line printer
xx EST ordinal of local batch equipment
cc Channel number
mmmm Maintenance status; bits 10 and 9 as
follows.
01 Valid format code was set but is
not in PFC buffer
10 Internal PFC parity error
11
PFC load overflow
No response (inactive) was received after
a function code was issued to the specified
local batch equipment (converter and
equipment status unavailable).
ACTION
Inform customer engineer.
Inform customer engineer.
Refer to section 8
for possible action.
Inform site analyst.
Inform customer engineer.
Inform customer engineer.
ROUTINE
QAP
QAP
MREC
QAP
QAP,
lCD