Control Data Corporation CYBER 170 Series Operator's Manual page 278

-
t p
~
Q
tI:>o
0)
Q
tI:>o
Co)
c:n
0)
o
Q
~
MESSAGE
npu IS NOT NPU NAME
n.nnn K CPU SCANS.
n. nnn K INPUT CYCLES.
n.nnn K OUTPUT CYCLES.
n.nnn KILO TRANSACTION ABORTS.
n.nnn KILO TRANSACTIONS PROCESSED.
name LOST PRIOR CONFIGURATION INFO
name MESSAGE SENT
n.nnn MS. DRIVER MAX. CYCLE.
name NETOFF IMMINENT
divnam-NO ERRORS ENCOUNTERED.
SIGNIFICANCE
The network operator entered a NOP overlay
command containing an invalid NPU name
(npu).
Informative message indicating the number
of CPU scans ItS has completed since
initialization. Dayfile message.
Informative message indicating the number of
input cycles that Export has completed.
Dayfile message.
Informative message indicating the number
of output cycles that Export has
~ompleted.
Dayfile message.
Upon transaction termination, this message
indicates how many transaction tasks have
aborted.
Self-explanatory.
The NPU specified has failed or was reloaded
during recovery. Recovered configuration
information is disregarded and CS will
configure the NPU from the LCF.
Informative message indicating that the
message entered by the local operator has
been sent to the specified element which
may be a terminal or an NPU.
Informative message indicating length of
the longest driver service cycle in
milliseconds. Dayfile message.
The local operator attempted to issue an
IDLE command for
an
application (.name) which
is already in the process of terminating.
A properly verified network and/or local
configuration file has been created or
listed from the indicated division by the
NDL processor.
ACTION
Correct NPU name and
reenter the command.
None.
None.
None.
·Data base administrator
may have to correct data
base to account for
tr ansac tions.
None.
Reenter any desired
ENABLE or DISABLE
commands.
None.
None
None.
None.
ROUTINE
NS
ILS
ILS
ILS
TAFNAM2,
TAFTS2
TAFNAM2,
TAFTS2
CS
CS
lLS
CS
DAYNNO,
NDLLIST