Control Data Corporation CYBER 170 Series Operator's Manual page 206

-
I t'
w
t-:)
en
Q
"' " '
W
U1
en
Q
Q
t"'I
MESSAGE
EQxx. HOLD.
EQxx LOCAL AREA OVERFLOW.
EQxx LOCAL AREA SECTOR ERROR.
EQxx LOCAL AREA SECTOR RESET.
EQxx LOCAL AREAS INITIALIZED.
EQxx,MRT PROCESSED BUT NOT REWRITTEN.
EQxx. NO PAPER.
Line
EQ
xx
SIGNIFICANCE
printer xx is waiting.
One of the following equipment
LP Any line printer
LR 580-12 line printer
LS 580-16 line printer
LT.580-20 line printer
EST ordinal of line printer
types.
An attempt to checkpoint a new local area
has resulted in overflowing the local area
sector. The local area sector is a sector
within the label track containing
information from the MST local area. Each
entry in this area is associated with a
unique machine ID. This message is caused
by the attemped recovery of· a device by
machines using more than 37B different
machine IDs.
xx EST ordinal of device
An unrecoverable error occurred while trying
to read the local area sector (the sector
within the label track containing
information from the MST local area).
xx EST ordinal of device
A local area sector contained incorrect
information and the entire sector is
disregarded.
xx EST ordinal of device
Informative message indicating that the
inactive local areas on the device were
initialized.
xx EST ordinal of device
An
unrecoverable write error was encountered
on the link device while attempting to zero
out the MRT for
de~ice
with EST ordinal xx.
Processing continued.
Line printer xx is out of paper.
EQ . One of the following equipment
types.
xx
LP Any line printer
LR 580-12 line printer
LS 580-16 line printer
LT 580-20 line printer
EST ordinal of line printer
ACTION
If desired, continue
printing via DSD command
CONTINUE (refer to
section 3).
Inform site analyst.
Either 'one of the
following actions should
be performed.
In order to access
the device, change
the machine's ID
(via deadstart) to
one that already
exists on the device
Initialize the
device to clear the
entire local area.
Inform site analyst.
Device must be
initialized and the bad
sector flawed.'
Inform site analyst.
None.
Inform customer engineer;
error should also be
logged in error log.
Correct paper condition.
ROUTINE
lCD
lCK
IMS,
lCK
IMS
IMS .
lMR
lCD