Control Data Corporation CYBER 170 Series Operator's Manual page 207

"'--_/ \, J
en
o
,;..
~
<:.n
en
o
o
t"'
tp
~
~
-
"-- j
MESSAGE
EQxx. NOT READY.
EQxx. OFF.
EQ OR DN ILLEGAL.
EQxx,PF CATALOG SIZE ERROR.
EQxx PF INITIALIZE COMPLETE.
EQxx nnnn PRESERVED FILE ERRORS.
EQxx,nnnn PRINT ERRORS.
"---.,J
~j
SIGNIFICANCE
Local batch equipment xx is not ready.
EQ One of the following equipment
types.
CP 415 card punch
CR 405 card reader
LP Any line printer
LR
580~12
line printer
LS 580-16 line printer
LT 580-20 line printer
xx EST ordinal of local batch equipment
Local batch equipment xx has been logically
turned off.
EQ One of the following equipment
types.
CP 415 card punch
CR 405 card reader
LP Any line printer
LR 580-12 line printer
LS 580-16 line printer
LT 580-20 line printer
xx EST ordinal of local batch equipment
Either the specified EST ordinal (EQ) is
greater than 77B or does not define a mass
storage device, or the device number
specified (DN) is greater than 77B.
The size of the permanent file catalogs
on device with EST ordinal xx is incorrect
for the current system.
Informative message indicating the
permanent file initialization operation
completed successfully.
xx EST ordinal of device
Message indicating the number of preserved
files encountered during mass storage device
recovery which had system sector errors or
could not be identified. Mass storage
device recovery is performed during system
deadstart or when a removable device is
introduced into the system.
xx' EST ordinal of device
nnnn Number of files in error
Print errors detected on line printer xx.
EQ One of the following equipment
types.
LP Any line printer
ACTION
Ready the equipment.
If desired, equipment
may be turned on via DSD
command ON (refer to
section 3).
Correct and enter GO.
Inform site analyst.
None.
Inform site analyst;
supply dumps of dayfile
and error log. Files
that were in error (or
the entire device)
should be reloaded.
Inform customer engineer.
ROUTINE
lCD
lCD
MSI
REC,
QlS
IMS
REC,
CMS
lCD,
QAP