Control Data Corporation CYBER 170 Series Operator's Manual page 179

en
CI
"""
W
(11
en
CI
CI
t'"
~
-
~
.
; \
"-.'
' "
\,-
MESSAGE
APPLICATION FAILURE
APPLICATION NETOFF
ARGUMENT ERROR.
ASSIGN DBFORM LOAD TAPE.
ASSIGN EQUIPMENT NUMBER xx.
ATTACH ERROR ON - filename
ATTACH MODE MUST BE W, M, R, OR RH.
AUTO HOST INITIALIZATION-GO NOT REQUIRED
AUTO-RECOGNITION TERMINAL
\-
)
SIGNIFICANCE
4 Unknown application was
attempting NETON action
' -
)
'-....r--'
5 Nonprivileged application was
attempting actions reserved for
privileged applications
The application specified in the status
message immediately preceding this message
has failed.
The application specified in the status
message immediately preceding this message
has terminated normally.
Dayfile message indicating that the
parameter list on the ISF entry contained an
illegal parameter.
B-display message requesting that the
operator mount either a DBFORM reformat
load tape or the next tape in a sequence of
load tapes.
B-display message requesting that the
operator assign mass storage equipment with
EST ordinal
xx
toDBFORM's control point.
The transaction executive cannot attach the
file f,ilenam under present conditions. The
file does not exist or permission has not
been given to the TAF user name.
The mode parameter on the CRH statement must
be one of the specified values.
The NAM procedure file (NAMffff) which was
specified during initialization initiated a
job containing a
GO
directive. The
GO
directive causes pr.ocessing to
co~tinue
automatically and disallows any operator
intervention during initialization. The
default NCF and LCF as specified in the
jobs initiated by NAMffff are used.
An attempt to enable an auto-recognition
terminal was unsuccessful. Necessary
information was not specified in the LCF.
ACTION
required.
Restart the application
i f desired.
Res~art the application
if desired.
Repeat the ISF entry
with the correct
parameter list.
Mount a DBFORM reformat
load tape.
Enter an n.ASSIGN
command to assign the
requested equipment to
DBFORM.
Correct error and
reinitialize executive.
Correct the mode
parameter on the CRM
statement or inform
site analyst.
None.
None. It is not
possible to enable the
terminal.
\.
\
\.~--~-
ROUTINE
CS
CS
ISF
DB FORM
DB FORM
TAF
TAF
CS
CS