Cyberlog Display For Unscheduled Event Caused By Hardware; Cyberlog Display For Unscheduled Event Caused By Software - Control Data Corporation CYBER 170 Series Operator's Manual

If the reason for an unscheduled event is a hardware
failure, the following display (figure 2-29) appears, to allow
more specific identification to be made.
Enter the code for the component causing the software
failure. The item you select appears on the line labeled
COMPONENT.
Enter the code for the component causing the hardware
failure. The item you select appears on the line labeled
COMPONENT.
I
NOTE
I
If the reason for an unscheduled event is a software failure,
the following display (figure 2-30) appears.
Exact information is required for
all
component entries. If you do not know
the component causing the failure, enter
the code for UNKNOWN.
2-30
CYBERLOG
EVENT TYPE: UNSCHEDULED
REASON: HARDWARE
ENTER THE CODE FOR THE COMPONENT CAUSING' FAILURE
CODE DESCRIPTION
o
OTHER
1 CPU
2 PPU/CHANNEL
3 MEMORY
. 4 EXTENDED MEMORY
5 TAPE SUBSYSTEM
6 DISK SUBSYSTEM
7 MASS STORAGE SUBSYSTEM
8 UNKNOWN
Figure 2-29. CYBERLOG Display for Unscheduled Event Caused by Hardware
CYBERLOG
EVENT TYPE: UNSCHEDULED
REASON: SOFTWARE
ENTER THE CODE FOR THE .COMPONENT CAUSING FAILURE
CODE
a
1
2
3
4
5
DESCRIPTION
OTHER
OPERATING SYSTEM
COMPILER/ASSEMBLER
APPLICATION PROGRAMS
DATA MANAGEMENT
UNKNOWN
Figure 2-30. CYBERLOG Display for Unscheduled Event Caused by Software
60435600 J