Control Data Corporation CYBER 170 Series Operator's Manual page 262

-
~
00
C)
Q
.r:o.
c.:I
C11
C)
Q
Q
t:"f
MESSAGE
SuPERVISION ALARM -- CS,RC=routine,
case,state
SUPERVISION ERROR -- CS,RC=routine,
case,state
SUPERVISION ERROR -- NS,RC=ec
SUPIO ERROR ec ON file
SIGNIFICANCE
The communications supervisor (CS) has
detected an unusual but nonfatal network
condition.
routine Name of routine that detected the
case
error
2-digit internal case number
(decimal)
state 2-digit internal state number
(decimal)
The communications supervisor (CS) has
detected an internal program error. If
DEBUG was defined on the NAM program
library during installation, an error exit
is taken and processing aborts. If DEBUG
was not defined during installation, a core
dump is taken and processing continues.
routine Name of routine that detected the
case
error
2-digit internal case number
(decimal)
state 2-digit internal state number
(decimal)
The network supervisor (NS) has detected an
internal program error.
ec Error code
1-15 Logical error received by NS
16 Illegal destination node
17 Wrong process sent message
18 Cannot create logical link
19 Illegal PFC/SFC received
20 Dump index full
A SUPIO (supervision program I/O) error has
been detected on file.
ec Error code
0001 Write parity error; data
transferred
0002 Unrecognizable write address;
data transferred
0003 . Unrecognizable write, detail
status error; data transferred
0011 Buffer full on coded file
0013 Buffer full on binary file
0021 Operation complete on coded
0023
0031
0033
file
Operation complete on binary
file
End-of-file on coded file
End-of-file on binary file
ACTION
None.
Submit' dumps to site
analyst for further
action. If DEBUG was
defined, restart NAM to
continue.
None. If NS aborts, it
automatically restarts.
If the message LCF
NOT
AVAILABLE follows, an I/O
error occurred on LCF
during initialization.
If the
m~ssage
SUPERVISION ERROR-CS
follows, an I/O error
occurred on LCF after
the GO command was
issued. Refer to those
messages for the
appropriate action.
A new NCF or LCF can be
assigned before GO is
issued but cannot be
re-assigned afterward. A
ROUTINE
CS
CS
NS
NS, .
CS