Control Data Corporation CYBER 170 Series Operator's Manual page 186

tt' ....
to.:)
0)
Q
.a:a.
w
til
0)
Q
Q
~
MESSAGE
CMRDECK NOT ON TAPE.
COMMAND AREADY RECEIVED
COMMAND ILLEGAL AFTER DISABLE NETWORK
COMMAND ILLEGAL AFTER
GO
COMMAND ILLEGAL BEFORE GO
COMMAND OUTSTANDING
COMPARE FILE DEFINE ERROR.
filenam FOR jobnam NOT STAGED.
COMPARE FILE PURGE ERROR.
filenam FOR jobnam NOT STAGED.
COMPLETE.
CON xx.
CON CSaaaa DSbbbb.
SIGNIFICANCE
Operator message indicating that the CMRDECK
number specified on bits 3 through 8 of word
13
on the deadstart panel is not contained
on the deadstart tape being used.
Informative message indicating that the
command just entered has already been
entered and is currently being processed.
The second entry of the command is ignored.
An
attempt was made to enter a command
considered illegal at this time. All
network/local operator commmartds (except
STATUS,APPLS and STATUS,APPL=name) are
illegal after the network has been disabled.
The command which was just entered is
illegal after the
GO
command has been
entered.
The command which was just entered is
illegal before the
GO
command is entered.
Informative message indicating that a
previous network/local operator command is
still being processed.
The staging of file filenam for job jobnam
was abandoned because of a system error.
The staging of file filenam for job jobnam
was abandoned because of a system error.
Informative message indicating that the
time-sharing subsystem termination is
complete.
System dayfile message indicating that the
operator resumed printing on BATCHIO
equipment xx.
Operator message indicating that a connect
reject error has occurred during an express
deadstart dump.
aaaa Channel converter status
ACTION
Redeadstart and select
the correct CMRDECK
number via deadstart
panel switches or
deadstart options
display.
None.
None.
None.
No action is required.
If desired, reenter
command after network is
initialized.
Reenter the command
after •• prompt.
Submit a Programming
System Report (PSR) with
supporting material.
Submit a Programming
System Report (PSR) with
supporting material.
None.
None.
Press carriage return to
retry the dump operation.
ROUTINE
SET
NS,
CS
CS
NS,
CS,
MCS
NS,
CS
CS
EXSTGE
EXSTGE
IAFEX,
TELEX
QAP
EDD