Control Data Corporation CYBER 170 Series Operator's Manual page 260

-
I f'
CD
en
en
o
~
Co)
C11
en
o
o
t:"'"
MESSAGE
SKF xX,nn.
SKP xX,nn.
SKR xX,nn.
SLVi MTOSPFN xxxx.
SLVi STOMNOi xxxx.
SPIN DOWN UNIT xx.
SR, nnnn SINGLE SECDED ERRORS.
SIGNIFICANCE
Sytem dayfile message indicating that the
operator requested a skip forward of nn
logical files on the print file on BATCHIO
equipment xx.
System aayfile message indicating that the
operator requested a skip forward of nn
sectors (PRUs) on the print file on BATCHIO
equipment xx.
System dayfile message indicating that the
operator requested a skip forward of nn
logical records on the print file on
BATCHIO equipment xx.
MSSSLV on mainframe i attempted to attach or
read the master-to-slave communication file
MTOSPFN. The status of this attempt is
indicated by xxxx, which can be one of the
following.
OK
ATTACH PROBLEM
LENGTH PROBLEM
NO MID MATCH
MSSSLV on mainframe i attempted to establish
access to the slave-to-master communication
file STOMNOi. The status of this attempt is
indicated by xxxx, which can be one of
the following.
OK
ATTACH PROBLEM
BUSY
DEFINE PROBLEM
Unit xx should be deactivated prior to a
physical pack switch.
Informative message indicating the number
of SECDED single-bit error corrections that
have occurred during the last hour (or
since last deadstart if less than an hour
has elapsed). This message is issued at
the beginning of each hour. The maximum
value of nnnn which will appear is 7777
although more than 7777 errors may have
occurred.
ACTION
None.
None.
None.
If xxxx is OK, no
action is required. If
xxxx indicates an error
condition, an n.IDLE
command should be
entered to terminate
MSSSLV.
If xxxx is OK, no action
is required. If xxxx
indicates an error
condition, an n. IDLE
command should be
entered to terminate
MSSSLV.
Deactivate unit xx.
None.
ROUTINE
QAP
QAP
QAP
EXSLV
EXSLV
RDM
1MB