Control Data Corporation CYBER 170 Series Operator's Manual page 240

-
t c
I
C)
C)
C)
<::I
01:>0
c,..,
CJ1
C)
<::I
<::I
t"I
MESSAGE
NIP FATAL ERROR PROC
=
name.
NIP RECEIVED BAD BSN.
NIP/SCP ERROR RC=ec JOBID=jobid.
SIGNIFICANCE
NIP has detected a fatal error and will
abort after taking a dump. This message
usually indicates an internal problem
within NIP or the operating system.
name First 4 characters of the NIP
procedure from which the message
was issued
Informative message indicating that the
block sequence number that NAM expected and
what it actually received were different.
If compiled with DEBUG on, NIP aborts;
otherwise, NIP continues.
Informative message indicating that NIP has
received an error response with code ec
from the operating system as the result of
a system control point call. NIP takes a
dump; if DEBUG is on and the error was
fatal, NIP aborts. Fatal error codes
usually indicate an internal problem within
NIP or the operating system.
ec Error code which caused response
41 Invalid job identifier;
fatal.
42 Bad NIP address; fatal.
43 Application passed bad
address to NIP; fatal for
application •
. 44 Application rolled out;
nonfatal.
45 Specified application is
not found in system;
nonfatal.
57 Long term connection
already exists between NIP
and application; fatal.
60 Long term connection
request rejected; fatal.
61 Long term connection does
not exist between NIP and
application; fatal.
62 Number of words transferred
between subsystem and
application is over allowed
limit; fatal.
63 Short term connection does
not exist between NIP and
application; fatal or
nonfatal.
64 NIP is not established with
ACTION
Supply dumps to site
analyst.
None.
Supply dumps to site
analyst.
ROUTINE
NIP
NIP
NIP