Control Data Corporation CYBER 170 Series Operator's Manual page 181

Q)
Q
. .a=.
w
c.n
Q)
Q
Q
t"'4
~
-
,,--j
~-~--,:
·MESSAGE
BAD VERIFICATION RECORD ON
~DL.
BKF xX,nn.
BKP xX,nn.
BKR xX,nn.
BLANK LABELS DO NOT VERIFY.
BLANK MESSAGE IGNORED
BLOCK SEQUENCE ERROR, lfn AT addr.
BREAK OUTSTANDING.
' "
--_/
\.~-) \.~.
SIGNIFICANCE
An
incorrect application definition
language (ADL) file was encountered during
MCS initiation.
System dayfile message indicating that the
operator requested a backspace of nn
logical 'files on the print file on BATCHIO
equipment xx •.
System dayfile message indicating that the
operator requested a backspace of nn
sectors (PRUs) on the print file on BATCHIO
equipment xx.
System dayfile message indicating that the
operator requested a backspace of nn
logical records on the print file on
BATCHIO equipment xx.
This message can occur only during blank
labeling of a tape and indicates that the
tape label read does not match the label
written.
The local operator attempted to send a null
or blank message to a single terminal or all
the terminals on an NPU. The message is
ignored.
For a.specific block, the block number
recorded on ·the tape did not match the block
number expected by the system tape loader.
Informative message indicating that an
application attempted to send a block on a
connection which was not reset following a
break or stop from the NPU.
ACTION
Inform site analyst.
Recreate ADL file.
None.
None.
None.
Repeat the blank labeling
operation or inform the
site analyst.
None.
Perform either of the
following actions.
- Type GO. to continue
deadstart. Further
block checking is
disabled and the
information
transferred from
tape may not be
valid.
- Redeadstart using a
different tape unit
or a different
deadstart tape.
None.
\
'.
ROUTINE
MCS
QAP
QAP
QAP
BLANK
CS
D10
NIP
\----,