Control Data Corporation CYBER 170 Series Operator's Manual page 161

,/
./
/
)
./
. . /
60435600 K
***
MACHINE RECOVERY UTILITY
~**
DESCRIPTION OF TABLE ENTRIES •
EQ - EST ORDINAL OF EQUIPMENT.
UN - UNIT NUMBER.
DN - DEVICE NUMBER.
FM/PN - FAMILY OR PACK NAME (IF ANY)
STATUS - U UNAVAILABLE.
R REMOVABLE.
N GLOBAL UNLOAD.
X AUXILIARY PERMANENT FILE DEVICE.
MID{S) SHARING DEVICE - MACHINE ID{S) OF OTHER
MACHINES CURRENTLY SHARING DEVICE.
(*
BY MID INDICATES MACHINE HAS
BEEN DETERMINED TO BE DOWN.)
DESCRIPTION OF PARAMETERS.
ID - MID OF DOWNED MACHINE TO PROCESS.
EQ - EST ORDINALS OF DEVICES SHARED BETWEEN THIS
MACHINE AND DOWNED MACHINE TO PROCESS. I.E.
EQ=XX,XX, ••• ,XX. DEFAULT = ALL. I.E. EQ=ALL.
OP=I AND OP=R ARE PARAMETERS WHICH MAY BE
ENTERED IF 844 OR 885 RESERVE SITUATIONS OCCUR. OP=I WILL
CAUSE THE DEVICE TO BE IGNORED. OP=R WILL CAUSE
ALL UNIT RESERVES ON THAT CONTROLLER TO BE CLEARED.
THESE PARAMETERS ARE ONLY VALID FOR THE CURRENT
RESERVED 844 OR 885 UNIT AND MUST BE REENTERED
UPON REOCCURENCE OF ANOTHER RESERVE SITUATION.
DESCRIPTION OF K-DISPLAY COMMANDS.
GO - INITIATE PROCESSING OF DEVICES SPECIFIED.
RERUN - REINITIALIZE K-DISPLAY AND RERUN PROGRAM.
STOP - TERMINATE PROGRAM.
+ -
PAGE RIGHT DISPLAY IF .GT. 240 SHARED DEVICES.
Figure 8-3. MREC Right Screen K Display
8-3