Control Data Corporation CYBER 170 Series Operator's Manual page 271

~
c
~
~
U1
~
C
c
t"'
ttl
CD
-.:I
~--
-
"-. "--
MESSAGE
TY NOT ALLOWED.
UN MUST BE SPECIFIED.
UN=usernum NOT VALID ON FM=family.
UNABLE TO ACTION COMMAND AT THIS TIME
UNABLE TO ATTACH NAM BINARIES.
UNABLE TO ATTACH TOTAL BINARIES.
UNABLE TO ATTACH TOTAL DBMOD BINARIES.
UNKNOWN FILE FORMAT.
USER ECS DISABLED.
USER ECS IMPROPERLY ALLOCATED.
USER ECS SYSTEM SECTOR ERROR.
"'--,'
~j
SIGNIFICANCE
Value specified for TY parameter was not
valid (legal values are F or X).
Auxiliary device is defined as private.
Thus, user number must be specified or the
device must be redefined as public.
User number usernum on the specified family
is not valid. The user number and family
may not be defined or are incorrect in xxJ
file.
The network/local operator command entered
was valid but could not be process sed
because a network element required for
completion of the command had some other
activity in progress.
The NAMAIP direct file could not be
attached under the transaction subsystem
user number.
File of Total binaries is not under the
user index of the transaction subsystem.
One or more of the DBMOD files listed in
TDBID could not be attached under the user
index of the transaction subsystem.
There is a logical error in the structure of
the input file. It does not conform to the
established format rules.
Jobs that assign user ECS are no longer
being scheduled because of unrecovered ECS
errors.
The amount of ECS specified on the CMRDECK
entry UEC does not ,match the amount defined
previously in the system sector Of the user
ECS chain.
The system sector of the user ECS chain is
in error and cannot be read.
ACTION
Correct and enter GO.
Specify user number or
enter UN=NULL to indicate
that private device is
being made public.
Inform site analyst.
Wait for the activity
to complete
(approximately
15
seconds) and reenter
the command.
Inform site analyst.
Correct error and
reinitialize transaction
executive.
Correct error and
reinitialize 'transaction
executive.
None.
Reenable user ECS
scheduling after ECS
errors have been
corrected.
Redeadstart and correct
the UEC entry.
Deadstart and
initialize ECS to
reallocate the ECS area.
"--
-
"
ROUTINE
MSI
MSI
TAF
NS,
CS
TAF
TAF
TAF
KTSDMP
1MB
REC
REC