C)
o
,;.
~
c.n
C)
o
o
t"'I
tp
....
o
c.n
-
'-
MESSAGE
name NOT ACTIVE
xx NOT DEFINED IN DBID.
xxx NOT FOUND ON DEVICE.
ENTER ALTERNATE DEVICE LOCATION.
xxx NOT IN PP LIB.
xxx NOT IN PP LIB.
CALLED BY yyy.
xxxxxx NOT INITIALIZED BY TOTAL.
STATUS IS
yyyy.
appl NOT NETTED ON
name NOT RECOGNIZED
eq xx, OUTPUT LOST.
ovlnam OVERLAY LOAD ERROR.
"--/
"-/
SIGNIFICANCE
The network or local operator attempted to
reference an inactive element (name).
Data base xx specified in an initialization
K-display command was not found in DBID.
The deadstart file does not contain
the operating system or the DDS module.
xxx
Significance
DSB
DDS module
OSB
Operating system
Dayfile message indicating that PP package
xxx was not found in PP libraries.
Dayfile message indicating that PP pack-
age xxx, which was called by package yyy,
was not found in the PP libraries.
An
error was encountered on the Total data
base.
The local operator attempted to issue an
IDLE command for an application (appl) which
was inactive.
The network or local operator attempted to
reference an element (name) which could not
be recognized.
An
unrecoverable write error has been
encountered.
The output file for the job
has been discarded.
eq
Equipment type of device
xx EST ordinal of device
The MCS overlay could not be loaded so MCS
aborted.
ovlnam Overlay name
ACTION
Wait for the desired
element to become
active and reenter the
command.
Add data base xx to
DBID and reinitialize
transaction executive.
Entry of alternate
device location is
not sup'ported for
NOS.
Install the
operating system
or DDS module on
the device and
redeadstart.
Ensure that the correct
PP package name was
specified.
Ensure that the correct
PP package name was
specified or inform
site analyst.
Regenerate Total data
base.
Refer to Total
Reference Manual for
status.
None.
Enter valid element
name.
Inform site analyst.
Either a new flaw should
be added to the device
or the problem causing
the write error should
be corrected.
Inform site analyst.
'-
-"
ROUTINE
NS,
CS
TAF
EBL
SFP
SFP
TAF
CS
NS,
CS
lCJ
MCS
'----
Need help?
Do you have a question about the CYBER 170 Series and is the answer not in the manual?