Control Data Corporation CYBER 170 Series Operator's Manual page 225

C)
o
tI:oo
c:.,)
c.n
en
o
o
t"I
tp
c:.n
.....
-
",-j
",-j
MESSAGE
JOB{S) HUNG IN SYSTEM.
JOURNAL TYPE DOES NOT MATCH xxJ FILE.
LABEL READ ERROR/ENTER STOP.
LABEL TRACK CONFL ICT.
LABEL VERIFICATION ERROR.
LCF ASSIGNED,PFN=filenam,UN=usernam
~
~j
SIGNIFICANCE
One or more jobs of multiterminal origin or
TELEX origin were not cleared from the system
queues before TELEX initialization.
Normally, TELEX clears all jobs of these
types when it is terminated.
Journal .file entries in the xxJ file do not
match the files themselves. This causes the
transaction subsystem to abort.
A mass storage read error was encountered
while attempting to verify the pack label.
While attempting to initialize a aevice at
deadstart time, it has been determined that
the track reserved via CPUMTR is not the
first available track in the TRT.
Recovery is impossible.
The label being verified did not match the
expected values.
Informative message indicating that the LCF
has been attached successfully. This
message is followed by the date and time
from the LCF verification record.
filenam Name of LCF
usernam User name under which the LCF is
stored
ACTION
Restart TELEX using DSD
command TELEX (refer to
section 3).
Consult TAF data base
administrator. Examine
xxJ file for the journal
file entries.
Enter.STOP.on all
machines to continue the
return switch of the
physical packs.
Inform site analyst. The
TRT (and possibly a dump
of RMS) must be
interrogated to determine
the conflict. A level 0
deadstart may be neces-
sary to allow deadstart
initialization of the
device.
In single mainframe
mode, or if all machines
in'multimainframe mode
received the message,
deactivate the
replacement unit and
ensure that the correct
pack has been mounted.
If the correct pack was
mounted, or if not all
machines in
multimainframe mode
received the message,
enter
stop
on all
machines to continue
the return switch of
physical packs.
None.
\
.'-----....
~
ROUTINE
TELEX
TAF
RDM
RMS
RDM
CS