Installing The Ion Max Or Ion Max-S Ion Source Housing - Thermo Scientific TSQ Series Hardware Manual

Installing the Ion MAX or Ion MAX-S Ion Source Housing

To reinstall the Ion MAX or Ion MAX-S ion source housing
1. Align the two guide pin holes on the rear of the ion source housing with the ion source
housing guide pins on the mass spectrometer. Carefully press the ion source housing onto the
ion source mount. See
Figure 38. Ion source housing (rear)
Ion source housing
Figure 39. Ion source mount, showing the ion source housing guide pins and ion source interface
Thermo Scientific
Figure 38
locking levers
Guide pin holes
release lever
Ion source housing
guide pins
5
Removing and Reinstalling the Ion Source Housing
Installing the Ion MAX or Ion MAX-S Ion Source Housing
and Figure 39.
Ion source
interface
release
lever
TSQ Series Hardware Manual 65