Parameters: 18-** Data Readouts 2 - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Descriptions

3.19 Parameters: 18-** Data Readouts 2

18-36 Analog Input X48/2 [mA]
Range: Function:
0 [-20 - 20 ] View the actual current measured at input X48/2.
*
18-37 Temp. Input X48/4
Range: Function:
0 [-500 - View the actual temperature measured at input
*
500 ] X48/4. The temperature unit is based on the
selection in parameter 35-00 Term. X48/4
Temperature Unit.
18-38 Temp. Input X48/7
Range: Function:
0 [-500 - View the actual temperature measured at input
*
500 ] X48/7. The temperature unit is based on the
selection in parameter 35-02 Term. X48/7
Temperature Unit.
18-39 Temp. Input X48/10
Range: Function:
0 [-500 - View the actual temperature measured at input
*
500 ] X48/10. The temperature unit is based on the
selection in parameter 35-04 Term. X48/10
Temperature Unit.
18-60 Digital Input 2
Range: Function:
0 [0 - 65535 ] View the signal states from the active digital
*
inputs. '0' = no signal, '1' = connected signal.
18-90 Process PID Error
Range:
0 % [-200 - 200 %]
*
18-91 Process PID Output
Range:
0 % [-200 - 200 %]
*
18-92 Process PID Clamped Output
Range:
0 % [-200 - 200 %]
*
18-93 Process PID Gain Scaled Output
Range:
0 % [-200 - 200 %]
*
®
VLT AutomationDrive FC 301/302 Programming Guide
Function:
Function:
Function:
Function:
MG33MI02 - Rev. 2013-11-20
3 3
167