Parameter Lists; Parameter Lists And Options; Introduction - Danfoss VLT AutomationDrive FC 302 Programming Manual

Parameter Lists

4 Parameter Lists

4.1 Parameter Lists and Options

4.1.1 Introduction

Frequency converter series
4 4
All = valid for FC 301 and FC 302 series
01 = valid for FC 301 only
02 = valid for FC 302 only
Changes during operation
"TRUE" means that the parameter can be changed while
the frequency converter is in operation and "FALSE" means
that the frequency converter must be stopped before a
change can be made.
4-Set-up
'All set-ups': the parameter can be set individually in each
of the four set-ups, i. e. one single parameter can have
four different data values.
'1 set-up': data value is the same in all set-ups.
Data Description
type
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
Table 4.1 Data Type
174
®
VLT AutomationDrive FC 301/302 Programming Guide
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
MG33MI02 - Rev. 2013-11-20