Danfoss VLT AutomationDrive FC 302 Programming Manual page 81

Parameter Descriptions
4-60 Bypass Speed From [RPM]
Array [4]
Range: Function:
Enter the lower limits of the speeds
to be avoided.
4-61 Bypass Speed From [Hz]
Array [4]
Range: Function:
Size related [ 0 - par. Some systems call for avoiding
*
4-14 Hz] certain output speeds due to
resonance problems in the system.
Enter the lower limits of the speeds
to be avoided.
4-62 Bypass Speed To [RPM]
Array [4]
Range: Function:
Size related [ 0 - par. Some systems call for avoiding
*
4-13 RPM] certain output speeds due to
resonance problems in the system.
Enter the upper limits of the
speeds to be avoided.
4-63 Bypass Speed To [Hz]
Array [4]
Range: Function:
Size related [ 0 - par. Some systems call for avoiding
*
4-14 Hz] certain output speeds due to
resonance problems in the system.
Enter the upper limits of the speeds
to be avoided.
®
VLT AutomationDrive FC 301/302 Programming Guide
MG33MI02 - Rev. 2013-11-20
3 3
79