Tunnel Global Source-Address; Tunnel Statistics Enable - H3C MSR 5600 Comware 7 Vxlan Command Reference

Examples
# Assign VXLAN tunnels 1 and 2 to VXLAN 10000.
<Sysname> system-view
[Sysname] vsi vpna
[Sysname-vsi-vpna] vxlan 10000
[Sysname-vsi-vpna-vxlan-10000] tunnel 1
[Sysname-vsi-vpna-vxlan-10000] tunnel 2
Related commands
display vxlan tunnel

tunnel global source-address

Use tunnel global source-address to specify a global source address for VXLAN tunnels.
Use undo tunnel global source-address to restore the default.
Syntax
tunnel global source-address ip-address
undo tunnel global source-address
Default
No global source address is specified for VXLAN tunnels.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address : Specifies an IP address.
Usage guidelines
A VXLAN tunnel uses the global source address if you do not specify a source interface or source
address for the tunnel.
The global source address takes effect only on VXLAN tunnels.
Examples
# Specify 1.1.1.1 as the global source address for VXLAN tunnels.
<Sysname> system-view
[Sysname] tunnel global source-address 1.1.1.1

tunnel statistics enable

Use tunnel statistics enable to enable packet statistics for all VXLAN tunnels associated
with a VSI.
Use undo tunnel statistics enable to disable packet statistics for all VXLAN tunnels
associated with a VSI.
Syntax
tunnel statistics enable
19