Hard disk drive (HDD) / solid state disk (SSD)
7.5.3
Installing 2.5-inch HDD/SSD modules
Customer Replaceable
Unit (CRU)
Tools:
Phillips PH1 / (+) No. 1 screw driver (for installation frame)
Preliminary steps
▶ When working on a floorstand model, open the HDD bay cover, see
"Removing accessible drive covers" on page
▶ Locate the correct drive bay, see
page
202.
Removing a 2.5-inch HDD/SSD dummy lock
In configuration with only one 8x 2.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no HDD
backplane behind.
Figure 121: Removing the dummy lock
218
"2.5-inch HDD/SSD configurations" on
Upgrade and Maintenance Manual
Hardware: 5 minutes
101.
TX2550 M5