[:Sense]:Power Subsection - Agilent Technologies N9340B Programmer's Manual

Default Unit:

[:SENSe]:POWer Subsection

Default Unit:
N9340B Programmer's Guide
Stop Frequency
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
Set the stop frequency.
*RST:
3.0 GHz
Hz
Key access: FREQ > Stop Freq
Input Attenuation
[:SENSe]:POWer[:RF]:ATTenuation <rel_ampl>
[:SENSe]:POWer[:RF]:ATTenuation?
Set the input attenuator. This value is set at its auto value if
input attenuation is set to auto.
*RST:
20 dB
Range:
0 to 70 dB
dB
Key access: AMPTD > Attenuation Auto Man
Input Port Attenuator Auto
[:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
Select the input port attenuator range to be set either
automatically (On) by the Reference Level Setting or
manually (Off).
*RST:
On
Key access: AMPTD > Attenuation
Command Reference 5
89