Important Safety Information; Safety Instructions; General And Personal Safety Precautions - MUTOH ValueCut VC-600 Maintenance Manual

Important Safety Information

Safety Instructions

General and Personal Safety Precautions

[PERSONAL SAFETY]
For personal safety, observe the following general precautions:
A second person should be available to disable the system in an emergency.

Wear appropriate protective gear that fits comfortably.

Do not wear loose-fitting clothes. If you are wearing a long-sleeved shirt, fold the cuffs up your

arm.
Never wear gloves close to moving parts.

Necklaces, ties and scarves should be tucked inside shirts.

Long hair should be covered.

[ELECTRICAL TOOL SAFETY]
When using Electrical Tools make sure to:
Use tools that are in good operating order. Any tool that appears electrically or mechanically

faulty must be labeled and sent immediately for repair.
Make sure that you are electrically insulated when using electrical tools. Wear rubber-soled

shoes and stand on a dry surface.
If, during the use of electrical equipment, you feel an electrical discharge (e.g. a tickling

sensation on your skin) immediately stop using that tool. Label it, and send it for repair.
[GENERAL SITE SAFETY REQUIREMENTS]
Fire extinguishers must be in working order and within easy reach.

The main power supply switch must be easily accessible.

The system site must be suitably illuminated from all sides.

Before operation, carefully read the warning labels on your Cutting plotter unit as well as the

cautions and warnings in this manual.
Connect the Cutting plotter to a properly grounded power outlet. Make sure the voltage level of

the Cutting plotter matches that of the power source.
Don't dissemble the unit while system power is on since the power supplies inside contain high

voltage.
Never leave the machine unattended during operation.

Follow the instructions on maintaining and cleaning your system. Not only will this enable you

to utilize your machine efficiently, but it will also ensure that your machine runs safely.
VCE-MM-02
3
MAINTENANCE MANUAL