Comply With Following Regulations; Warnings, Cautions And Notes - MUTOH DrafStation User Manual

This chapter explains about the plotter installation, warning terms which the operator needs to know, caution
items and warning labels stuck on the plotter main unit.

1.1 COMPLY WITH FOLLOWING REGULATIONS

The CE marking is a mandatory European marking for certain product groups to
indicate conformity with the essential health and safety requirements set out in
European Directives.
By affixing the CE marking, the manufacturer, his authorized representative, or the
person placing the product on the market or putting it into service ensures that the item
meets all the essential requirements of all applicable EU directives and that the
applicable conformity assessment procedures have been applied.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC – WEEE regulation.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste. The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.
Be sure to read and understand the safety warnings before handling the printer.

1.2 WARNINGS, CAUTIONS AND NOTES

The contents of alarm displays included in this User's Guide and warning label stuck on main body of the
plotter are classified into three categories according to degree of danger.
Understand the meaning of the following warning terms and follow the contents (instructions) in this guide.
Warnings
If ignored, it would lead to dangerous situations where death or serious injury
may be caused.
If ignored, it would lead to dangerous situation, causing slight or middle class
illness, or damage to the product or parts of the product.
Used for a special caution and for information which needs to be emphasized.
10
User's Guide DrafStation and Drafstation Pro
Chapter 1 :Safety information
Meaning
AP-75730, Rev. 2.1, 19/01/2009