Regulatory And Safety Information; Emc Statement For Ce Marking; Fcc Compliance; Important Note - MUTOH Ultima 850 Operation Instructions Manual

Mutoh Ultima Multi-Purpose Cutting Plotter - Operation Instructions

1.1. EMC STATEMENT FOR CE MARKING

Important :
This is a Class A product approved for industrial environments. In a domestic
environment this product may cause radio interference in which case you may be
required to take adequate measures.

1.2. FCC COMPLIANCE

This equipment complies with the requirements for a Class A computing device in the FCC rules, part 15,
subpart J.
Operation of this device in a residential area may interfere with television reception or operation of utilities.
Cutters generate weak radio signals and may interfere with television reception and utilities. If the cutter
does interfere with radio or TV reception, try the following:
Change the direction of your radio and TV reception antenna or feeder.
Change the direction of the cutter.
Move either the cutter or the receiving antenna so that there is more distance between them.
Be sure the cutter and the receiving antenna are on separate power lines.

1.3. IMPORTANT NOTE

Technical problems and maintenance, which require the cutter to be opened, can only be done by qualified
personnel who were trained to repair this type of machine.
Unauthorized removing of covers and/or overruling safety locks can be dangerous and will result in your
guarantee becoming void.
1. REGULATORY AND SAFETY
INFORMATION
9
AP-75125, Rev 1.3 ; 20/10/04