Table of Contents
Advertisement
1.2 IMPORTANT NOTES
Technical problems and maintenance, which require the cutter to be opened, can only be done by
qualified personnel who were trained to repair this type of machine.
Unauthorized removing of covers and/or overruling safety locks can be dangerous and will result in
your guarantee becoming void.
After powering OFF the machine, wait at least 10 seconds before powering ON again. Not respecting
this time interval could damage the machine.
1.3 SAFETY LABELS
Be careful when servicing this machine. The cutter has two fuses.
One neutral and one in phase.
After operation of the fuse, parts of the equipment that remain
energized might represent a hazard during servicing.
Be sure not to stare in the laser mounted on the cutting head.
Be careful not to pinch your fingers between the
pressure rollers and grid rollers when loading media
for example.
12
User's Guide SC-PRO Cutting Plotter
CHAPTER 1 : SAFETY INSTRUCTIONS
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
