Danfoss VLT AQUA Drive FC 202 Programming Manual page 82

Parameter Description
5-96 Pulse Out #29 Timeout Preset
Range:
0 % [0 - 100 %] Contains the frequency to apply to the
*
3 3
5-97 Pulse Out #X30/6 Bus Control
Range:
0 % [0 - 100 %] Contains the frequency to apply to the
*
5-98 Pulse Out #X30/6 Timeout Preset
Range:
0 % [0 - 100 %] Contains the frequency to apply to the
*
80
Programming Guide
Function:
digital output terminal 29, when it is
configured as [Bus Controlled Timeout] and
time-out is detected
Function:
digital output terminal 27, when it is
configured as [Bus Controlled].
Function:
digital output terminal 6, when it is
configured as [Bus Controlled Timeout] and
time-out is detected.
Danfoss A/S © Rev. 2014-01-21 All rights reserved. MG20O702