Danfoss VLT AQUA Drive FC 202 Programming Manual page 227

Parameter Lists
Par. No. # Parameter description
22-8* Flow Compensation
22-80 Flow Compensation
22-81 Square-linear Curve Approximation
22-82 Work Point Calculation
22-83 Speed at No-Flow [RPM]
22-84 Speed at No-Flow [Hz]
22-85 Speed at Design Point [RPM]
22-86 Speed at Design Point [Hz]
22-87 Pressure at No-Flow Speed
22-88 Pressure at Rated Speed
22-89 Flow at Design Point
22-90 Flow at Rated Speed
MG20O702
Programming Guide
Default value
[0] Disabled
100 %
[0] Disabled
ExpressionLimit
ExpressionLimit
ExpressionLimit
ExpressionLimit
0.000 N/A
999999.999 N/A
0.000 N/A
0.000 N/A
Danfoss A/S © Rev. 2014-01-21 All rights reserved.
4-set-up Change Conver-
during sion index
operation
All set-ups TRUE -
All set-ups TRUE 0
All set-ups TRUE -
All set-ups TRUE 67
All set-ups TRUE -1
All set-ups TRUE 67
All set-ups TRUE -1
All set-ups TRUE -3
All set-ups TRUE -3
All set-ups TRUE -3
All set-ups TRUE -3
Type
Uint8
Uint8
Uint8
Uint16
4 4
Uint16
Uint16
Uint16
Int32
Int32
Int32
Int32
225