Danfoss VLT AQUA Drive FC 202 Programming Manual page 22

How to Programme
Q3-30 Feedback Settings
2 2
Parameter 1-00 Configuration Mode
Parameter 20-12 Reference/Feedback Unit
Parameter 3-02 Minimum Reference
Parameter 6-20 Terminal 54 Low Voltage
Parameter 6-21 Terminal 54 High Voltage
Parameter 6-25 Terminal 54 High Ref./Feedb. Value
Parameter 6-00 Live Zero Timeout Time
Parameter 6-01 Live Zero Timeout Function
Table 2.4 Q3-3 Closed Loop Settings
20
Programming Guide
Q3-3 Closed Loop Settings
Q3-31 PID Settings
Parameter 20-81 PID Normal/ Inverse Control
Parameter 20-82 PID Start Speed [RPM]
Parameter 20-21 Setpoint 1
Parameter 20-93 PID Proportional Gain
Parameter 20-94 PID Integral Time
Danfoss A/S © Rev. 2014-01-21 All rights reserved. MG20O702