Customizing The Endpoint In The Megawizard Plug-In Manager Design Flow - Altera Cyclone V User Manual

Hard ip for pci express
Hide thumbs Also See for Cyclone V:
Table of Contents

Advertisement

2–4
4. Check the Summary page to ensure that you have entered all the information
correctly.
5. Click Finish to create the Quartus II project.

Customizing the Endpoint in the MegaWizard Plug-In Manager Design Flow

This section guides you through the process of customizing the Endpoint in the
MegaWizard Plug-In Manager design flow. It specifies the same options that are
chosen in
f
For further information about the parameter settings, refer to
Settings.
Follow these steps to customize your variant in the MegaWizard Plug-In Manager:
1. On the Tools menu, click MegaWizard Plug-In Manager. The MegaWizard
Plug-In Manager appears.
2. Select Create a new custom megafunction variation and click Next.
3. In Which device family will you be using? Select the Cyclone V device family.
4. Expand the Interfaces directory under Installed Plug-Ins by clicking the + icon
left of the directory name, expand PCI Express, then click Cyclone V Hard IP for
PCI Express <version_number>
5. Select the output file type for your design. This walkthrough supports VHDL and
Verilog HDL. For this example, select Verilog HDL.
6. Specify a variation name for output files <working_dir>/example_design/
<variation name>. For this walkthrough, specify <working_dir>/example_design/
gen1_x4.
7. Click Next to open the parameter editor for the Cyclone V Hard IP for PCI
Express.
8. Specify the System Settings values listed
Table 2–1. System Settings Parameters
Number of Lanes
Lane Rate
Port type
Application Layer interface
RX buffer credit allocation - performance for
received requests
Reference clock frequency
Use 62.5 MHz Application Layer clock for ×1
Number of functions
Cyclone V Hard IP for PCI Express
Chapter 14, Testbench and Design
Parameter
Chapter 2: Getting Started
MegaWizard Plug-In Manager Design Flow
Example.
Chapter 3, Parameter
inTable
2–1.
Value
×4
Gen 1 (2.5 Gbps)
Native endpoint
Avalon-ST 64-bit
Low
100 MHz
Leave this option off
1
November 2011 Altera Corporation

Advertisement

Table of Contents
loading

Table of Contents