Status And Counters Data; Show System - HP Aruba JL253A Management And Configuration Manual

Status and counters data

This section describes the status and counters screens available through the switch console interface and/or the
WebAgent.
NOTE: You can access all console screens from the WebAgent via Telnet to the console. Telnet
access to the switch is available in the Device View window under the Configuration tab.

show system

Syntax
show system [chassislocate|information|fans]
Description
Displays global system information and operational parameters for the switch.
Parameters and options
chassislocate
Displays the chassisLocator LED status. Possible values are ON, Off, or Blink. When the status is On or Blink,
the number of minutes that the Locator LED will continue to be on or to blink is displayed. (See Figure 39:
Command results for show system chassislocate command on page 375.)
information
Displays global system information and operational parameters for the switch. (See Figure 41: Switch
system information on page 375.)
power-supply
Shows chassis power supply and settings.
temperature
Shows system temperature and settings.
fans
Shows system fan status. (See Figure 40: System fan status on page 375.)
374 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08