Table of Contents
Advertisement
devices that reside in a private network via HTTP(S), enabling a new set of deployment and management models
today, not possible using SNMP.
The client side, when configured, will contact the server at a predefined URL, using HTTP or HTTPS as protocol.
After authentication, the ACS is able to perform the following basic operations:
•
Update CPE Configuration.
•
Update CPE TR-069 parameters.
•
Update CPE firmware.
•
Reboot CPE (backup, startup, and running configurations)
•
Run CPE ping diagnostics.
•
Reset CPE to factory default.
•
Get periodic Status (several parameters can be retrieved depending on what is supported).
Since TR-069 uses HTTP, it can be used across a WAN. If the CPE can reach the URL, it can be managed.
TR-069 is mostly a push protocol where the client periodically sends information without server requests. This
allows for greater scalability over traditional SNMP based tools, which are also bounded to work within the LAN,
while TR-069 can offer management to remote offices.
754
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
Advertisement
Table of Contents
Troubleshooting
