Table of Contents
Advertisement
debug Command
Chapter 13 Troubleshooting
acl
all
cdp
destination
event
Sends ACL syslog logging to
configured debug destinations.
When there is a match with a "deny"
statement, directs the resulting
message to the configured debug
destinations.
Sends debug logging to configured
debug destinations for all ACL,
Event Log, IP-OSPF, and IP-RIP
options.
Displays CDP information.
logging: Disables or re-enables
syslog logging on one or more
syslog servers configured with the
logging syslog-ip-addr
command.session: Assigns or re-
assigns destination status to the
terminal device that was most
recently used to request debug
output.buffer: Enables syslog
logging to send the debug message
types specified by the debug
<debug-type> command to a
buffer in switch memory.
Sends standard Event Log
messages to configured debug
destinations. (The same messages
are also sent to the switch's Event
Log, regardless of whether you
enable this option.)
Table Continued
511
Advertisement
Table of Contents
Troubleshooting
