Displaying the information you need to diagnose problems
Use the following commands in a troubleshooting session to more accurately display the information you need to
diagnose a problem.
Syntax:
alias
Creates a shortcut alias name for commonly used commands and command options.
Syntax:
kill
Terminates a currently running, remote troubleshooting session. Use the show ip ssh command to list the
current management sessions.
Syntax:
[no] page
Toggles the paging mode for show commands between continuous listing and per-page listing.
Syntax:
repeat
Repeatedly executes one or more commands so that you can see the results of multiple commands displayed
over a period of time. To halt the command execution, press any key on the keyboard.
Syntax:
setup
Displays the Switch Setup screen from the menu interface.
Restoring the factory-default configuration
As part of your troubleshooting process, it may become necessary to return the switch configuration to the factory
default settings. This process:
•
Momentarily interrupts the switch operation
•
Clears any passwords
•
Clears the console Event Log
•
Resets the network counters to zero
•
Performs a complete self test
•
Reboots the switch into its factory default configuration, including deleting an IP address
There are two methods for resetting to the factory-default configuration:
•
CLI
•
Clear/Reset button combination
Chapter 13 Troubleshooting
541