Authoritative; Dhcp Client Boot File; Bootfile-Name; Dhcp Client Default Router - HP Aruba JL253A Management And Configuration Manual

Trying to delete non existing pool
Only alphanumeric characters, numerals and
underscore is allowed in the pool name. Violating
this would throw the following error message.
Trying to delete existing pool or adding new pool
when DHCP server enabled.

Authoritative

Syntax
[no] authoritative
Description
The DHCP server is the sole authority for the network configured under this pool. When the DHCP server is
configured as authoritative, the server will respond with DHCP ACK or NACK as appropriate for all the received
DHCP REQUEST and DHCP INFORM packets belonging to the subnet.
Non-authoritative DHCP INFORM packets received from the clients on a non-authoritative pool will be ignored.
Parameters and options
authoritative
Configure the DHCP server authoritative for a pool.

DHCP client boot file

bootfile-name

Syntax
[no] bootfile-name <FILENAME>
Description
Specify the boot file name to be used as the boot image.

DHCP client default router

default-router

Syntax
[no] default-router <IP-ADDR-STR> [IP-ADDR2 IP-ADDR8]
Description
Configure the DHCP pool context to the default router for a DHCP client. List all of the IP addresses of the default
routers.
Two IP addresses must be separated by a comma.
Maximum of eight default routers can be configured.

DNS IP servers

Chapter 8 DHCPv4 server
The specified address pool does not exist.
Invalid name. Only alphanumeric characters and
hyphen are allowed.
DHCP server should be disabled before changing
the configuration.
261