Using The Event Log For Troubleshooting Switch Problems - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

Support indicators:

V - Validated to respond to DOM requests

N - No support of DOM

D - Documented by the component suppliers as supporting DOM

NA - Not applicable to the transceiver (copper transceiver)

NOTE: Not all transceivers support Digital Optical Monitoring. If DOM appears in the Diagnostic

Support field of the show interfaces transceiver detail command, or the

hpicfTransceiverMIB hpicfXcvrDiagnostics MIB object, DOM is supported for that transceiver.

Using the Event Log for troubleshooting switch problems

The Event Log records operating events in single- or double-line entries and serves as a tool to isolate and

troubleshoot problems.

Once the log has received 2000 entries, it discards the oldest message each time a new message is received.

The Event Log window contains 14 log entry lines. You can scroll through it to view any part of the log.

Once the log has received 2000 entries, it discards the oldest message each time a new message is received.

The Event Log window contains 14 log-entry lines. You can scroll through it to view any part of the log.

The Event Log is erased if power to the switch is interruptedor if you enter the boot system

command. The contents of the Event Log are not erased if you:

10GbE SFP+ SR

10GbE SFP+ LR

10GbE SFP+ LRM

10GbE SFP+ ER

10GbE X2-SC LRM

10Gbe X2-SC ER

Reboot the switch by choosing the Reboot Switch option from the menu interface.

Enter the reload command from the CLI.

Aruba 2930F / 2930M Management and Configuration Guide

for ArubaOS-Switch 16.08