Rate-Limiting - Gmb Features When Fast-Connect Smartrate Ports Are Configured - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

150 Accumulated time (ms) spent in fast retrain since last AN.

Number of RFI Training Link Recovery Events since last AN.

Number of Link Recover Events since last AN.

Established link speed

Number of attempts to establish link

Uptime since link was last established (ms) : 5099

Local port advertised speeds

1000Mbps 2500Mbps

Link partner speed capability

Link Partner matching vendor: Yes

Smart Rate port that is linked at 1Gbps

show interface C5 smartrate

Status and Counters - Smart Rate information for Port C5

Firmware (major)

Firmware (minor)

Firmware (candidate)

Firmware (provision)

Established link speed

Number of attempts to establish link

Uptime since link was last established (ms)

Local port advertised speeds

Link partner speed capability

Link Partner matching vendor: Yes

Rate-Limiting — GMB features when Fast-Connect SmartRate ports are

When Rate-Limiting or Guaranteed Minimum Bandwidths are configured for 5Gbps ports, the granularity of

percentage-based rates for the 5Gbps speed is in steps of 2%. For example, a 1% rate-limit for a 5Gbps port will

function as a 2% limit while a 5% limit will function as a 6% limit.

The Guaranteed Minimum Bandwith profiles will show the same behavior. For example on an 8-queue system,

the actual default servicing profile will be 2%, 4%, 30%, 10%, 10%, 10%, 16%, and 20%. The CLI and SNMP

Aruba 2930F / 2930M Management and Configuration Guide

for ArubaOS-Switch 16.08

Troubleshooting