Table of Contents
Advertisement
Validation
If the username and the key installation user
for that privilege do not match, a message
displays and installation is not allowed.
This will also happen when the
authentication method is set for two-factor.
If the maximum number of <username : TA
profile> associations is reached for a given
TA profile, a message displays.
If secondary authentication type for two-
factor authentication chosen is not "none", a
message displays.
If the authentication method is anything other
than two-factor and the two-factor
authentication method options are set, a
message displays.
If two-factor authentication is set and user
tries to SSH into another system using ssh
<ip | hostname> command, a message
displays.
If timeSync is in SNTP or Timep when NTP
is enabled.
If timesync is NTP and NTP is enabled and
we try to change timesync to SNTP.
If we try to configure NTP servers more than
the configured max-associations value.
If we have 'n' NTP servers configured and
we try to configure a max-associations value
less than (n) number of NTP servers already
configured.
If authentication key-id is not configured.
If key-id is not marked as trusted.
If min poll value is more than max poll value. NTP max poll value should be more than min poll
If ipv6 is not enabled on vlan interface.
Chapter 2 Time Protocols
Error/Warning/Prompt
The username in the key being installed does not
match the username configured on the switch.
Maximum number of username associations with a TA
profile is 10.
Not legal combination of authentication methods.
Not legal combination of authentication methods.
SSH client is not supported when the two-factor
authentication is enabled.
Timesync is not configured to NTP.
Disable NTP before changing timesync to SNTP or
TIMEP.
The maximum number of NTP servers allowed is 2.
Max-associations value cannot be less than the
number of NTP servers configured.
Authentication key-id %d has not been configured.
Key-id %d is not trusted.
value.
IPv6 address not configured on the VLAN.
61
Advertisement
Table of Contents
Troubleshooting
