Show Ntp Statistics; Show Ntp Status - HP Aruba JL253A Management And Configuration Manual

- 'ntpEntNotifConfigChanged' The notification to be sent when the NTP configuration
has changed.
- 'ntpEntNotifLeapSecondAnnounced' The notification to be sent when a leap second
has been announced.
- 'ntpEntNotifHeartbeat' The notification to be sent periodically (as defined by
ntpEntHeartbeatInterval) to indicate that the NTP entity is still alive.
- 'ntpEntNotifAll' The notification to be sent when all traps have been enabled

show ntp statistics

This command is used to show NTP statistics.
Syntax
show ntp statistics
Description
Show information about NTP packets.
Examples
Switch(config)# show ntp statistics
NTP Global statistics information
NTP In Packets
NTP Out Packets
NTP Bad Version Packets
NTP Protocol Error Packets
switch(config)# show ntp statistics
NTP Global statistics information
NTP In Packets
NTP Out Packets
NTP Bad Version Packets
NTP Protocol Error Packets : 0

show ntp status

Syntax
Description
Show the status of NTP.
show ntp status
Example
Switch(config)# show ntp status
NTP Status information
NTP Status
Synchronization Status : Synchronized
Stratum Number
Reference Assoc Id
Reference
58
: 100
: 110
: 4
: 0
: 100
: 110
: 4
: Disabled
: 2
: 1
: 192.0.2.1
Aruba 2930F / 2930M Management and Configuration Guide
NTP Mode : Broadcast
Peer Dispersion : 8.01 sec
Leap Direction : 1
Clock Offset : 0.0000 sec
Root Delay : 0.00 sec
for ArubaOS-Switch 16.08