802.3Bt Support - HP Aruba JL253A Management And Configuration Manual

Power Class
MPS Absent Cnt
Short Cnt
Current
If you want to view the PoE status of ports A6 and A7, you would use show power-over-ethernet A6-A7 to
display the data:
show power-over-ethernet <port-list> output
switch(config)# show power-over-ethernet slot A6-A7
Status and Counters - Port Power Status for port A6
Power Enable
Priority
AllocateBy
Detection Status
Over Current Cnt
Power Denied Cnt
Voltage
Power
Status and Counters - Port Power Status for port A7
Power Enable
Priority
AllocateBy
Detection Status
Over Current Cnt
Power Denied Cnt
Voltage
Power

802.3bt support

IEEE 802.3bt standard enables delivering up to 90W of power across a network cable supporting all standardized
copper link speeds of up to 10G-BaseT, commonly referred to as Power over Ethernet (PoE) or 4-Pair PoE.
Earlier IEEE 802.3af and IEEE 802.3at PoE specifications permit Type 1 and 2 PSEs to deliver power over 2-
pairs of a 4-pair Ethernet cable. The IEEE 802.3bt specifications permit Type 3 and 4 PSEs to deliver power over
all 4-pairs of the Ethernet cable enabling higher efficiency and power delivery to remote devices.
122
Shows the power class of the PD detected on the indicated port. Classes include:
• 0: 0.44 to 12.95 watts
• 1: 0.44 to 3.84 watts
• 2: 3.84 to 6.49 watts
• 3: 6.49 to 12.95 watts
• 4: For PoE+; up to 25.5 watts can be drawn by the PD
Shows the number of times a detected PD has no longer requested power from the port.
Each occurrence generates an Event Log message. ("MPS" refers to the "maintenance
power signature.")
Shows the number of times the switch provided insufficient current to a connected PD.
The total current, in mA, being delivered to PDs.
: Yes
: low
: value
: Delivering
:0
:0
: 55.1 V
: 8.4 W
: Yes
: low
: value
: Searching
:0
:0
: 0 V
: 0 W
LLDP Detect
Configured Type :
Value
Power Class
MPS Absent Cnt
Short Cnt
Current
LLDP Detect
Configured Type :
Value
Power Class
MPS Absent Cnt
Short Cnt
Current
Aruba 2930F / 2930M Management and Configuration Guide
: enabled
: 17 W
: 2
: 0
: 0
: 154 mA
: disabled
: 17 W
: 0
: 0
: 0
: 0 mA
for ArubaOS-Switch 16.08