Dhcpv6-Snooping Authorized-Server; Ddhcpv6-Snooping Database File - HP Aruba JL253A Management And Configuration Manual

Validation
Verify whether the port exist in the device. Module not present for port or invalid port: <PORT-
If the port is a part of a SVLAN and the
bridge mode is mixed mode.
If the port is not a part of a dsnoopv6
enabled VLAN
If trusted attribute is being configured on
a port on which max-binding has been
already configured.
If a Dynamic trunk is configured as a
trusted port.
If a Smart Link port is being configured as
a trusted port
If a trusted port is being configured as a
Smart Link port
dhcpv6–snooping authorized-server
Syntax
[no] dhcpv6-snooping authorized-server <IPV6-ADDRESS>
Description
Configure authorized DHCPv6 servers. For DHCPv6 snooping to allow a server to client packet to be forwarded, it
must be received on a trusted port from an authorized server. If no authorized servers are configured, all server
addresses are valid.
ddhcpv6–snooping database file
Syntax
[no] dhcpv6-snooping database file [ASCII-STR|delay <15-86400>| timeout<0-86400>]
Description
Configure a lease entry file and its options for storing DHCPv6 snooping binding database.
Parameters and options
ASCII-STR
Copies the DHCPv6 snooping lease file to a TFTP server. The parameter ASCII-STR is a URL and is in the
format tftp://<IP-ADDR>/<FILENAME>. The TFTP address can be up to 255 characters. IP-ADDR can
be an IPv4 address or an IPv6 address. The IPv6 address must be enclosed in square brackets [].
timeout seconds
Configures the number of seconds to wait for the DSNOOPv6 lease file transfer to complete. An error
message is displayed if the file transfer is not completed within the timeout value. A value of zero indicates
Chapter 9 DHCPv6 server
Error/Warning/Prompt
LIST>
Port %s cannot be configured as trusted port as it is
part of a SVLAN in QinQ mixed VLAN mode.
Port %s is not a part of a DHCPv6-snooping VLAN.
Disable max-binding feature configured on the port
before configuring it as a trusted port.
Cannot configure a port as a DHCPv6 Snooping trusted
port when Dynamic Trunking is enabled on that port.
Cannot configure a Smart Link port as a DHCPv6
Snooping trusted port.
Cannot configure a DHCPv6 Snooping trusted port as a
Smart Link port
275