Table of Contents
Advertisement
•
A mirroring policy is supported only on inbound IPv4 or IPv6 traffic.
•
A mirroring policy is not supported on a meshed port interface. (Classifier-based policies are supported only on
a port, VLAN, or trunk interface.)
•
Only one classifier-based mirroring policy is supported on a port or VLAN interface. You can, however, apply a
classifier-based policy of a different type, such as QoS.
•
You can enter multiple class action mirror statements in a policy.
◦
You can configure only one mirroring session (destination) for each class.
◦
You can configure the same mirroring session for different classes.
•
If a mirroring session is configured with a classifier-based mirroring policy on a port or VLAN interface, no
other traffic-selection criteria (MAC-based or all inbound and/or outbound traffic) can be added to the session.
Figure 67: Mirroring configuration in which only a mirroring policy is supported
•
If a mirroring session is already configured with one or more traffic-selection criteria (MAC-based or all inbound
and/or outbound traffic), the session does not support the addition of a classifier-based policy.
Figure 68: Mirroring configuration in which only traffic-selection criteria are supported
About applying multiple mirroring sessions to an interface
You can apply a mirroring policy to an interface that is already configured with another traffic-selection method
(MAC-based or all inbound and/or outbound traffic) for a different mirroring session.
The classifier-based policy provides a finer level of granularity that allows you to zoom in on a subset of port or
VLAN traffic and select it for local or remote mirroring.
438
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
Advertisement
Table of Contents
Troubleshooting
